



2. Process Flow Breakdown as Follows
| Process No. | Process Name | Detailed Process Description | Station No. | Turntable No. | Process Remarks |
|---|---|---|---|---|---|
| 1.1 | Automatic Feeding of Outer Seal Upper Press Cover | The outer seal upper press cover is automatically fed by a vibratory feeder, positioned by vision, and picked up by a manipulator to load into the fixed fixture | 0 | Turntable 1 | - |
| 1.2 | Automatic Assembly of Wave-shaped Seal Gasket | The wave-shaped seal gasket is automatically fed by a vibratory feeder, automatically positioned by vision, and picked up by a manipulator to load into the lower seal cover plate | 0 | Turntable 1 | - |
| 1.3 | Automatic Feeding of Umbrella-shaped Support Sheet | The umbrella-shaped support sheet is automatically fed by a vibratory feeder, positioned by vision, and picked up by a manipulator to load the diaphragm into the positioning fixture | 0 | Turntable 1 | - |
| 1.4 | Automatic Assembly of Umbrella-shaped Support Sheet | The umbrella-shaped support sheet assembly is automatically picked up by a manipulator and loaded into the outer seal upper cover | 0 | Turntable 1 | - |
| 1.5 | Turning Operation of Umbrella-shaped Support Sheet | The manipulator automatically turns the umbrella-shaped support sheet | 0 | Turntable 1 | Assembly of the outer seal upper press cover and umbrella-shaped support sheet is completed at this step |
| 2.1 | Automatic Feeding of Outer Seal Spacer Plate | The outer seal spacer plate is automatically fed by a vibratory feeder, automatically positioned, and picked up by a manipulator to load into the fixed fixture | 0 | Turntable 2 | - |
| 2.2 | Automatic Assembly of Umbrella-shaped Seal Gasket | The umbrella-shaped seal gasket is manually tray-loaded, positioned by vision, fed to the positioning turntable by a manipulator, and automatically assembled | 0 | Turntable 2 | - |
| 2.4 | Automatic Press-Fitting | Automatic press-fitting of the outer seal lower press cover | 0 | Turntable 2 | Assembly of the seal ring and gasket component is completed at this step |
| 2.5 | Assembly Mechanism Operation | Load the gasket component into the outer seal upper press cover & umbrella-shaped support sheet assembly | 0 | Turntable 2 | - |
| 2.6 | Automatic Press-Fitting of Finished Assembly | The manipulator automatically press-fits the finished product | 0 | Turntable 2 | - |
| 2.7 | Finished Product Unloading | The manipulator automatically unloads the finished product and places it onto the discharge conveyor line | 0 | Turntable 2 | - |
| 2.8 | Finished Seal Assembly Conveying | Finished products are automatically conveyed and buffered after unloading, with a buffering capacity of approximately 15 units | 0 | Turntable 2 | - |
| 3.1 | Automatic Assembly of Outer Seal Lower Cover | Automatic assembly of the outer seal lower cover | 0 | Turntable 3 | - |
| 3.2 | Automatic Loading of Seal Assembly into Lower Cover | Automatically load the seal assembly into the lower cover | 0 | Turntable 3 | - |
| 3.3 | Automatic Assembly of Outer Seal Upper Cover | Automatic assembly of the outer seal upper cover | 0 | Turntable 3 | - |
| 3.6 | Automatic Unloading of Finished Product | The manipulator automatically unloads the finished product and places it onto the discharge conveyor line | 0 | Turntable 3 | - |
1.Equipment Working Efficiency: 400PCS/H
2.Yield Rate: >99%
3.Operator Requirement: 1 person
4.Rated Input Power: Approx. 6.5KW
5.Equipment Dimensions: Approx. 6.521.8M (LWH)
6.Manual Operation Height: 850mm
7.Corresponding Brand Requirements for Component Configuration
Equipment Component Configuration List
| Item | Brand | Remarks |
|---|---|---|
| Guide Rail & Slider | HIWIN, AIR TAC | Genuine |
| Pneumatic Components | AIR TAC | Genuine |
| Motion Controller | SYNRIT | Genuine |
| HMI | WEINVIEW, DALTA | Genuine |
| Relay | OMRON | Genuine |
| Switching Power | DALTA, MEANWELL | Genuine |
| Asynchronous Motor | JSCC | Genuine |
| Servo Motor | KOSSI/HCFA | Genuine |
| Stepper Motor | RUI TE | Genuine |
| Bearing | NSK, HRB | Genuine |
| Sensor | Panasonic/Equiv. | Genuine |
| Magnetic Switch | AIR TAC | Genuine |
Q1: Can this trocar rear cover assembly machine handle different product specifications?
A1: Yes. Adopting modular design, the machine supports flexible changeover for various trocar rear covers. We provide non-standard customized solutions according to your product structure.
Q2: What is the production capacity of this automatic assembly machine?
A2: The standard output reaches 400 PCS per hour, and the yield rate is over 99%.
Q3: Is this machine suitable for cleanroom workshop?
A3: Yes. It adopts fully sealed structure to avoid contamination, which meets the requirement of cleanroom production.
Q4: How many workers can this equipment replace?
A4: It can replace 8–12 manual operators and increase your production capacity by more than 3 times.
Q5: Does the machine have quality inspection function?
A5: Yes. It is equipped with force control and vision closed-loop system to eliminate manual assembly errors and guarantee stable product quality.
Q6: Will you show all the product accessory details in this case?
A6: No. Different manufacturers have different trocar structures, so we do not display detailed accessory information. This case only shows partial working procedures. Please contact us for more details.
Q7: Is it possible to customize the machine based on our own trocar samples?
A7: Absolutely. We develop tailor-made non-standard automation solutions according to your product samples and technical requirements.
Copyright2018-2022 版权所有:厦门鑫锐特智能设备有限公司 All Rights Reserved | 闽ICP备2022011211号 本网站支持 IPv6