
Synrit offers custom automatic assembly machines for transducer components to manufacturers of automotive electronic parts. The machine is designed for assembling housings, transducer chips, copper pins and other components. It integrates silver paste dispensing, automatic chip assembly, copper pin cutting and fitting, vision inspection and defective product rejection, meeting the automated production needs of automotive electronics and new energy-related parts. If your factory is looking for automation equipment for automotive electronics, transducer dispensing and assembly machines, vision inspection equipment for auto parts or non-standard automation equipment suppliers, we can conduct solution evaluation based on your product drawings, samples, production cycle time and inspection requirements.
Targeting common requirements in transducer component production including dispensing weight control, transducer positioning, copper pin cutting & assembly and in-process quality inspection, the equipment integrates multiple processes into one special machine:
Manual housing loading → 1st silver paste dispensing → Vision inspection after dispensing → Automatic transducer assembly → 2nd silver paste dispensing → Vision inspection for dispensing and position → Automatic copper pin cutting & assembly → Finished product unloading Loading of housings and unloading of finished products are operated by staff, which can be completed by one operator. Intermediate processes including dispensing, chip assembly, copper pin cutting, assembly and inspection run automatically by the machine.
| Item | Parameter |
|---|---|
| Equipment Name | Automatic Assembly Machine for Automotive Electronic Transducer Components |
| Silver Paste Dispensing Volume (1st time) | 18 mg ± 1.8 mg |
| Silver Paste Dispensing Volume (2nd time) | Two dots, 1 mg ± 0.1 mg per dot |
| Transducer Assembly Accuracy | ±0.1 mm |
| Dispensing Mechanism | 3-axis servo dispensing mechanism |
| Paste Feeding Method | Servo push rod feeding |
| Transducer Feeding | Cartridge feeding, automatic separation |
| Copper Pin Feeding | Reel feeding, automatic cutting |
| Inspection Functions | Dispensing area inspection, transducer center position inspection |
| Handling of Defects | Automatic rejection |
| Loading & Unloading | Manual loading, manual unloading |
Parameter Note: The above are benchmark process and setting parameters. The equipment cycle time, continuous running performance, inspection standards and acceptance indicators shall be confirmed according to customer samples, process requirements and the technical agreement of the project.
This equipment solution is available for evaluation by the following enterprises:
To speed up solution evaluation, please prepare the following materials:
Q1: What processes can the machine complete automatically? A: The machine automatically completes silver paste dispensing, transducer separation & assembly, secondary dispensing, copper pin cutting & assembly, vision inspection and defective rejection. In this solution, housing loading and finished product unloading are done manually.
Q2: Are transducer chips loaded manually or assembled automatically? A: Transducer chips adopt cartridge feeding. Operators load the cartridge into the feeding machine, then the machine separates chips automatically and completes assembly via a 3-axis servo manipulator.
Q3: What inspection items can the machine perform? A: The standard solution includes dispensing area inspection and transducer center position inspection. Defective products will be rejected automatically. Additional inspection items can be assessed according to product quality requirements and samples.
Q4: Can dispensing volume and dispensing position be adjusted? A: Dispensing paths and coordinates are editable. The benchmark setting: 18 mg ± 1.8 mg for the first dispensing, two dots of 1 mg ± 0.1 mg each for the second dispensing. The actual adjustment range and measurement criteria shall be confirmed through process verification combined with silver paste properties.
Q5: What is the assembly accuracy of transducer chips? A: The benchmark assembly accuracy of the transducer chip is ±0.1 mm. The definition and verification method of accuracy shall be subject to the mutually confirmed technical agreement and acceptance standard.
Q6: How are copper pins fed and assembled? A: Copper pins are fed from reels. The machine feeds and cuts pins automatically, then the manipulator finishes assembly. Copper pin size, cutting length and assembly accuracy will be evaluated based on product drawings.
Q7: Can the machine support multiple product models? A: Multi-model compatibility can be evaluated according to structural differences, fixture switching mode, dispensing coordinates and inspection logic of different models. The compatible scope and changeover time will be confirmed in the solution phase.
Q8: What is the cycle time? How many pieces can be produced per hour? A: No fixed cycle time is confirmed for the time being. We can calculate the cycle time based on target output, motion sequence, inspection time and loading/unloading mode, and specify it in the technical solution and acceptance documents.
Q9: Can this machine be used for new energy vehicle parts production? A: This machine is customized for the assembly of automotive electronic components. Its adaptability for new energy vehicle-related parts can be assessed according to product structure and process requirements. Applicable products and inspection rules shall be confirmed after receiving your documents.
Q10: How to get the automation solution and quotation? A: Please provide product drawings or samples, existing process, target cycle time, inspection requirements and site layout. We will carry out process assessment, equipment design and project quotation accordingly.
If you are looking for automatic assembly equipment for automotive electronics, transducer dispensing and assembly machines, auto parts automation equipment or vision inspection non-standard equipment, you are welcome to send us drawings, samples and process requirements. Synrit will evaluate the customized equipment solution based on product structure, dispensing parameters, assembly accuracy, inspection items and on-site conditions.
Copyright2018-2022 版权所有:厦门鑫锐特智能设备有限公司 All Rights Reserved | 闽ICP备2022011211号 本网站支持 IPv6